FishTrax™ Intelligent Sonar uses SONAR sound waves to detect depth, locate fish, and define bottom contour, composition and structure. Using specialized microprocessors, these sound waves are generated by the FishTrax™ display and sent to the FishTrax™ Sonar Sensor (Transducer). The sonar sensor, acting first as a “speaker”, emits these sound waves as a series of pulses. Then, microseconds later, the sonar sensor switches to a “microphone” and listens for the return of the pulses as they bounce off of objects in the water column (referred to as “echoes”). The “echoes” are sent back to the display where, using proprietary algorithms in the FishTrax™ software, they are analyzed for location, size, and composition. These signal are then arranged by FishTrax’s™ Human Interface Software and displayed in an easy to understand manner on the VirtuView™ HD Color Display.
Articles in this section
- My FishTrax transducer is damaged. I don't see replacements on the website.
- Sonar Cross Talk
- FishTrax™ 1C | ACCESSING AND ADJUSTING THE FEATURES
- FishTrax™ 1C | ZOOM BOTTOM TRACKING
- FishTrax™ 1C | FISHTRAX™ SONAR FREQUENCIES
- FishTrax™ 1C | FISHTRAX™ 1C OPERATING MODES
- FishTrax™ 1C | SETTING THE FISH FINDER IN SIMULATION MODE
- FishTrax™ 1C | GETTING TO KNOW THE FISHTRAX™ 1C
- FishTrax™ 1C | INTRODUCTION TO FISHTRAX™ INTELLIGENT SONAR
- FishTrax™ 1 | UNCOVERING THE BEST HIDING PLACES