Follow

FishTrax™ 1 | UNDERSTANDING THE VIRTUVIEW™ ICON DISPLAY

   

  • Depth Readout

  • Simulator Indicator

  • Sensitivity Indicator

  • Fish Alarm On/Off

  • Backlight On/Off

  • Battery Strength Indicator

  • Weed Indicator

  • Water Temperature

  • Fish Icon

  • 10 Fish Depth

  • 11 Rock Indicator

 TURNING THE FISH FINDER ON/OFF 

1. To turn the fish finder ON, press and release the button.

2. To turn the fish finder OFF, Press and Hold the button for 3 seconds. 

 

PLACING THE FISH FINDER IN SIMULATION MODE  

1. To enter the Simulation Mode, while the fish finder is off, hold the    button for 3 seconds until the fish finder beeps, release the button.  

2. The fish finder is now in Simulation Mode and the Simulator icon will now be illuminated. 

3. The fish finder must be turned OFF and back ON again to access normal operation mode. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk