Follow

FishTrax™ | CARE OF YOUR FISH FINDER

1. Clean the sonar sensor and cable with fresh water and dry off before storing.  Do not submerge and/or spray the fish finder screen/housing with water or use chemicals to clean.  If necessary, wipe with a damp cloth. 

2. Remove the batteries from the fish finder to prevent battery leakage and corrosion. 

3. Store the fish finder in the storage bag in a cool, dry place.  Never leave it in temperatures over 120° F (49° C) as the extreme temperatures can damage the electronic components. 

 

Important:

Cold weather is extremely hard on the electrical components within the display housing.  It is suggested that you keep the Fish Finder in temperatures above 0° Fahrenheit (-17° Celsius) during operation.  The sonar sensor cable also becomes very stiff under cold conditions. Excessive winding or unwinding under these conditions may cause irreparable damage.  DO NOT WIND OR UNWIND THE CABLE IN TEMPERATURES BELOW 32º F (0º C). 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk