Follow

FishTrax™ 1X | SHALLOW WATER DEPTH ALARM

When turned on, the FishTrax™ 1X’s shallow water alarm will notify you of shallow water by sounding an audible alarm and flashing “Depth Alarm!” on the display.    

To Adjust the Shallow Water Alarm: 

1. Press and release the   button 1 time (MENU I will appear at the top of the screen) 

2. Press and release the ▾ button until “Alarms” is highlighted. 

3. Press the  to expand the Alarms Menu. 

4. Press and release the ▾ button until “Depth Alarm” is highlighted. 

5. Press the  button to increase the depth of Shallow Water Alarm, press to decrease the depth of the Shallow Water Alarm. 

      • To turn the alarm OFF, press and release the  button until “Off” is displayed between the triangles. 

      • Press and release the  button to save the adjustment and exit the Depth Alarm Setting.  

      • Press and release the V | ESC button to cancel the adjustment and exit the Depth Range Setting. 

6. Press and release the V | ESC button 3 times to exit the menu and return to the fish finder mode. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk