Follow

FishTrax™ | ADJUSTING THE SONAR SENSOR FLOAT

The Sonar Sensor float must be adjusted so that it is a minimum of 6 inches away from the sensor (it can be further  depending upon water conditions, see Note below). 

1. Pull out the rubber stopper.  

2. Adjust float so that it is 6 to 10 inches from the  sensor, or at your desired depth. 

3. Replace the rubber stopper by pressing it firmly into the float. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk