Follow

FishTrax™ 1C | ZOOM BOTTOM TRACKING

In normal fish finder mode you can zoom in on the bottom of the screen to get a high definition look at the bottom contour and composition.  This will enlarge the view of the bottom two times (2x).    

200 kHz or 83 kHz Sonar Zoom View  

While using the 200 kHz or 83 kHz frequencies, the Zoom will split the display to show the full range view on the right and the zoomed view on the left.  The full range view on the right also contains the Zoom Preview Box that shows what part of the full range view is shown in zoom view on the left.  While in “AUTO” Zoom mode the Zoom Preview Box will track the bottom.  

 Dual-View Sonar Zoom View 

In the 200 kHz / 83 kHz Frequency Mode, the display is split to show the 200KHz zoomed view on the right and the 83KHz zoomed view on the left. The full range view and Zoom Preview Box are not displayed.  

To Engage the Manual Zoom: 

1. Use the “Sonar” Tab in the Feature Menu to set the Depth Range to manual. 

2. Press the  button. 

3. Press the or  buttons to manually adjust the zoom position.  The Zoom Preview Box will move up or down on the screen showing you the depth of the “Zoomed” readings.     

4. Press the  button again to exit Zoom Bottom Tracking. 

 

To Engage the Auto Zoom: 

1. Use the “Sonar” Tab in the Feature Menu to set the Depth Range to “AUTO”. 

2. Press the  button. 

3. Press the  button again to exit Zoom Bottom Tracking.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk