Follow

FishTrax™ 1 | ACCESSING AND ADJUSTING THE FEATURES

To simplify the operation of the FishTrax™ 1 many of the complex features such as gain (power), interference (noise rejection), and depth range are adjusted automatically.  However there are 4 features that can be manually adjusted. 

• Sensitivity
• Audible Fish Alarm
• Display Backlight
• Fish Finders of Measure

 

SENSITIVITY 

There are 5 user selectable sensitivity settings to choose from.   

Sensitivity 5 Sensitivity 4 Sensitivity 3 Sensitivity 2 Sensitivity 1

To Turn the Sensitivity UP or Down:  

1. Press and release the MENU button.   

2. The Sensitivity Indicator () will blink. 

3. To increase the sensitivity press thebutton. 

4. To decrease the sensitivity press the button. 

5. Press V|ESC to exit the setup menu. 

 

AUDIBLE NOTIFICATION OF THE PRESENCE OF FISH  

You can set the FishTrax™ 1 to sound an audible alarm when a group of fish are detected.  It will NOT sound if just one fish is detected.

To Turn the Fish Alarm ON or OFF:  

1. Press and release the MENU button 2 times. 

2. The display will flash the Fish Alarm Icon (or)

 = Fish Alarm is ON 

 = Fish Alarm is OFF

4. Press the ESC button to exit the setup menu. 

 

DISPLAY BACKLIGHT 

Turning the backlight feature ON will keep the screen illuminated all the time.  This feature will greatly reduce the battery life of the Fish Finder, so it should only be used during low light conditions.  

To Adjust Backlight Setting:

 1. Press and release the MENU button 2 times. 

2. The display will flash the Fish Alarm Icon (or)

3. Press either the  or buttons to toggle the Alarm ON or OFF 

 = Fish Alarm is ON 

 = Fish Alarm is OFF

4. Press the ESC button to exit the setup menu 

 

CHANGING THE DISPLAY UNITS 

The FishTrax™ 1 can display readings in English (Ft/F) or Metric (M/C).  

To Adjust the Display Units:  

1. Press and release the MENU button 4 times. The display will flash the current Fish Finder’s setting next to the depth and temperature readout. 

2. Press either the  or buttons to toggle the Fish Finder of measure (Ft = Feet or M = Meters).  The selected Fish Finder of measure will blink.  

3. Press the ESC button to exit the setup menu 

 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk