Follow

FishTrax™ | USING THE SONAR SENSOR WITH THE FLOAT

Toss the sonar sensor and float assembly into the water at your desired fishing location.   

• To toss, place the sonar sensor and float in your hand, and pitch underhand.  Do not throw the sensor by the cable as this will cause unrepairable damage. Before tossing, be certain that the cable is free from tangles and is not wrapped around anything. 

• Use a pole to guide the sonar sensor to a desirable position or add a float kit (available on our website) on the cable to allow  the cable to float on top of the water. 

• To retrieve the sonar sensor and float,  simply pull in the cable being certain to neatly wind up the excess cable. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk