Follow

HawkEye In-Dash Depth Finder Mounted on PWC

"On Seadoos there is a round flat spot to the left front of the tunnel to mount the stock Seadoo depth finder. I took a scrap piece of 1/2" plexiglass that you can get at a plastics supply house and cut it 1/8 larger rectangle than the puck.  Then I cut it in half, end to end, on a band saw giving me two angled pieces. I glued the one piece of the plastic to the hull with 30 min epoxy and after it hardened I glued the puck to the top  of it with 30 min epoxy.  Perfect angle and reads at 70+ mph."  - Larry

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk