Follow

HawkEye Surface Mount Depth Sounder - 2008 RXP SEA-DOO


Customer Notes: After confirming lack of a factory transducer position on RXP I sanded an area forward port side of the jet tunnel & resin glued a plastic "camera" mould. With jetski horizontal (length/breadth) using spirit level, the mould was filled with resin to produce true flat area (facing down to seabed). Then glued transducer onto flat resin area. Plastic mould didnt stick well so simply glued resin assembly to hull. Cable routed on starboard side away from exhaust to DSM. Works a great at any speed.

















Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk